Depending on which wheel The Wheel Club - Tire and Wheel Lock, part # W1490, is mounted to will determine if a car can be towed. If the vehicle's non-drive wheels or wheels that are not powered by transmission are locked then this would prevent the vehicle from being towed. For example on a front wheel drive car, like your Mitsubishi Galant, if you were to put the wheel lock on the rear wheels, this would prevent the car from being towed by a traditional tow truck that tows the vehicle... view full answer...
Masterlock Pedal to Wheel lock # 256DAT, does not have any vehicle specific information, but it will work on any vehicle whose steering wheel and brake pedal setup will fit into the span of the lock.
As long as the distance from steering wheel to pedal is 30 inches or less, and the steering wheel is not larger than 13-1/2 inches in diameter, the # 256DAT lock should work well for your application. view full answer...
The Pop and Lock Power Custom Tailgate Lock you mentioned, part # PAL8200 will indeed tie into the existing power lock system of your vehicle and will lock and unlock with the key fob.
The # PAL8200 is not a universal-fit product. If you scroll down to the bottom the the product page for the # PAL8200, you can see the various Ford and Mazda truck models the # PAL8200 is compatible with. If you do not see your vehicle on that list, try looking through our figuide. Simply click on the provided... view full answer...
The correct Pop & Lock Custom Power Tailgate Lock for your 2008 Toyota Tacoma is part # PAL8521. This power tailgate lock works with your factory power lock system, so it locks and unlocks using your remote keyless entry system.
The tailgate lock wires directly into your vehicles OEM powered lock system.
The part you mentioned is designed for Ford vehicles, so you will instead need the # PAL8521. view full answer...
If you have a bulldog collar-lok coupler with a hole with pin like part # BD028387, you can use Bulldog Easy Access Coupler Lock part # BD580409. The Bulldog Coupler lock allows you to keep the trailer hooked up to the vehicle while locked.
This will also work on a Bulldog A-frame coupler like part # BD44150W0317. view full answer...
According to the manual for the # RM-2050-1 the towed vehicle's steering wheel must be locked or otherwise secured when towing. Failure to lock the steering wheel will allow the towed vehicle to pivot on the bed, causing it to hit the fender and wheel assembly of the dolly. Severe damage will result to both vehicles.
In order to lock the steering wheel if yours doesn't lock, you can use the seat belt lock feature on your vehicle. Loop the seat belt around the steering wheel several times... view full answer...
The Club Pedal to Wheel lock # WICL303RED does not have any vehicle specific information, but it will work on any vehicle whose steering wheel and brake pedal setup will fit into the span of the lock.
As long as the distance from steering wheel to pedal is in the range of 22-1/2" to 30" the # WICL303RED lock should work well for your application. view full answer...
What you'll want to use is the Lock N Roll vehicle-side hitch that has a 2-1/2 inch drop. Being 1/2 inch off is perfectly acceptable for towing, and won't give you any issues in regards to being level, so what you want is the following:
- Lock N Roll Articulating Hitch for 2" Receivers - 2-1/2" Drop/Rise - Vehicle Side # 336VS511
Then to secure it to your vehicle you'll need either Hitch Pin and Clip # 37201074 or Hitch Lock # e98880. view full answer...
For your 2002 Dodge 1500 Quad Cab Short Bed, the Pilot Integrated OEM Tailgate Lock # LH-007 is a compatible fit for your vehicle. This tailgate lock, custom-fit for your vehicle, has been designed to give your truck an OEM look while securing the tailgate to help prevent theft. The patented tailgate locks work well for pickups with truck caps and tonneau covers.
Please note, the locks cannot be keyed alike to match vehicle keys. view full answer...
The Pop & Lock Custom Tailgate Lock part # PAL8600 which is a fit for your 2018 Honda Ridgeline will work in conjunction with the factory door locks. The way it operates will depend on which side of the vehicle (passenger/driver) that you splice into the unlock/lock wires on.
For example, if you have the vehicle set to unlock the driver door when you are within 10 foot of the vehicle and you have the Pop & Lock kit spliced into the driver side door motor then the tailgate would unlock... view full answer...
When towing a vehicle on a dolly like the part # RM-2050-1 that you referenced you need the steering wheel to be locked so that around corners the dolly fenders don't hit the door or fender of the vehicle.
If your steering wheel doesn't lock when the key is off you can use your seat belt to lock it. Wrap the seat belt a couple times around the steering wheel and then buckle it in place. Now pull the seat belt all the way out so that as you let it retract it locks. Now your wheel will be locked. view full answer...
It sounds like you are asking if the HydraStar Electric Over Hydraulic Actuator for Drum Brakes # HBA-12 can be used for trailer brakes if you have an anti-lock braking system on your tow vehicle. The # HBA-12 is controlled by a brake controller like the # RED44FR which does not rely on the vehicle braking system. Assuming you are using a proportional brake controller it will brake in proportion to the vehicle's braking action. view full answer...
The Pop & Lock Custom Locking Tailgate Handle # PAL5409 uses a BOLT branded lock cylinder so you would just need to insert your vehicle's key in the core and turn it as far as you can clockwise. Once this has been done the lock will be keyed to your vehicle. view full answer...
The Pop & Lock Custom Tailgate Handle # PAL8540 is tied directly to your OEM power lock system so if your aftermarket remote controls the locks on your vehicle then yes, it will operate the Pop & Lock system as well.
I noticed that you input a 2018 Toyota Tacoma in the vehicle list. If that is what you will be installing the lock on then you would need part # PAL8535 instead of part # PAL8540. This will work in the same fashion as the part mentioned above. view full answer...
In order to install the Pop & Lock Custom Tailgate Lock part # PAL8600 on your 2017 Honda Ridgeline, you will need to find the red and yellow wires located underneath the driver's side kick panel. Once found, you will need to use the wire splice connectors found in the kit and attach the green wire on the tailgate lock to the red wire on the vehicle and the blue wire on the tailgate lock to the yellow wire on the vehicle. You may also want to double check the wires before you make the connections... view full answer...
As long as your vehicle has power door locks and your ARE V-Series truck cap has a frame-less, bonded glass door with a 1-1/8" center hole for a rotary latch you can use the Pop & Lock Power Locking Handle, part # PAL9555.
There are a few models of the V-Series depending on your vehicle. If your cap meets these specifications, then the Pop & Lock will be able to turn your rotary latch into an electronic (power locking) latch. view full answer...
The Stainless Receiver Lock, # e98882, should work just fine on your Ford and Jeep vehicles, but you should measure the Outside width of the hitch receiver at the hitch pin hole just to be sure. As long as this measurement is 2-9/16 inches or less this hitch lock will work for you.
We have found that this lock will not work on newer Toyota Tundra and Tacoma Vehicles that have thick walled 2 inch hitches and that the 2010 and newer GMC Chevy HD truck with 2-1/2 inch hitches have the same... view full answer...
The Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers # PAL9772 is more of a universal application and isn't designed for any specific vehicle so I'm not aware of any wiring charts for older or newer Rangers like your 2019 Ford Ranger.
You will need to connect this lock kit wiring to the existing vehicle wiring on your truck which will look different for different vehicles. You'll use a circuit tester to determine what wires are for which functions on your pickup.... view full answer...
We do have locks that will work with your Dexter A-60 Brake Actuator # DX56FR. The Coupler Lock # e98888 will allow you to secure the trailer to your vehicle when towing. This lock pin replaces the included push pin which comes with the actuator.
For storage you will want to use the Fastway Universal Trailer Coupler Lock # FA86-0015-316. This can be used with the coupler lock above as well. view full answer...
I have a solution for you, the Blaylock Total-Encasement Coupler Lock for 2" Bulldog Collar-Lok Couplers - Push Button # BLTL-22 is designed to put on your trailer while it is not coupled to your tow vehicle. We can however use the trailer Adjustable Trailer Coupler Latch Lock - 1/2" to 2-1/2" Span - 1/4" Diameter # e98883 to secure your trailer while it is coupled to your tow vehicle. view full answer...
Go To Results